R20 UHF 2ch Receiver “Modular Voice PRO Line”

The UHF Modular system created by Empire allows you to configure the microphone system according to your needs!

The UHF Rack Receiver with 2 channels, TY.R20, ensures reliable and high-quality reception and transmission. It has been designed to interface seamlessly with microphones from the Modular Voice PRO Line. The configuration system is extremely simple; just bring the microphone close to the receiver, and thanks to the infrared system, synchronization occurs automatically: it’s foolproof for anyone who has never dealt with this type of system.

The available channels are 200, allowing for the installation of multiple receivers in the case of larger setups. Volume adjustment is separate for each channel. Each channel has a balanced XLR output. There is also a 6.3mm Jack output that mixes the two channels, which is very useful for a simpler connection, directly to an audio system with a separate microphone input, such as the Empire WB-180PRO.

  • Power Supply: DC12V/1A
  • Working Current: 135mA
  • Working Power: 1.62W
  • Total Number of Channels: 200 CH
  • Carrier Band: 640-699.7MHz
  • Modulation Mode: PLL Phase-Locked Loop Integrated Control
  • Receiving mode: UHF
  • Noise Suppression: > 70dB
  • Radio Frequency Stability: ±0.005% (10-50°C)
  • Maximum Offset: about ±35KHz
  • Bandwidth: 60MHz
  • Frequency Interval: 300KHz
  • Frequency Response: 40Hz~19.5KHz ±3dB
  • Output Socket: 2X Balanced / 1 X Mix
  • Frequency Adjustment: IR Infrared Automation
  • Working Distance: >80m
  • Receiving Sensitivity: -85DB about 2dB
  • G.W: 1.75 (Kg)
  • UHF Receiver R20
  • 2 Antennas
  • Power Cable
Info request